Black Friday 🔥 PANAVISE 333 Rapid Assembly Circuit Board Holder
Affiliate reviews PANAVISE 333 Rapid Assembly Circuit Board Holder
So you can check out the other reviews 🔥 Cashback up to 70% PANAVISE 333 Rapid Assembly Circuit Board Holder at Amazon.com
only with $
| Brand | Panavise |
| Item Dimensions LxWxH | 12.01 x 7.09 x 10.24 inches |
| Item Weight | 3.02 Kilograms |
- Eight rotating adjustment positions at the head, six positive lock positions in the vertical plane, and variable height adjustment
- Hold circuit boards up to 12-Inch (304.8mm) wide and up to 0.156 (4mm) thick
- 5.0 lb Weighted Base is extremely stable
- Height (base to top of vertical shaft): 10-Inch (254mm), Weight: 6.4 lbs. (2.9kg)
- Limited Lifetime Warranty!
From the manufacturer
Work Rapidly
The Rapid Assembly Circuit Board Holder arms slide along the 12" (304.8 mm) crossbar, allowing circuit boards up to 10" (254 mm) to be held. The arms are locked into place by tightening knobs at their bases. V-shaped grooves along the inner edge of the arms ensure that circuit boards are securely held, while notches positioned laterally near their tips can be used to hold small electronic parts. One arm includes a spring lever that allows for easy placement and removal of boards. The connector between the center rod and the crossbar swivels to eight adjustable positions, as well as six positive lock positions on the vertical plane. Variable height adjustments can also be made along the center rod. The weighted base is five pounds, and formed of cast iron with wing structures at the sides which spread its weight, increasing stability. Each of the winged sections contains a pre-drilled and tapped hole suitable for mounting accessories.
 |
 |
 |
 |
|---|---|---|---|
Circuit Board Holder Arms & Cross BarThe arms are designed to be used with circuit boards up to 4 mm thick. The cross bar can be adjusted or replaced (replacement bars of different lengths and replacement arm sold separately). Cross Bar Knobs allow easy release for simple adjustments. | Quick Release & "V" NotchThe Quick Release Spring Tension Lever allows for easy placement and removal of boards. The "V" Notch at the top of both arms allows you to easily work with electrical components for wiring or soldering. | Center ConnectorThe connector swivels to 8 adjustable positions. It has 6 positive lock positions on a vertical plane. Height adjustments can be made with the adjustment knob. | Weighted BaseCast iron for added tool stability. Two-winged, low-slung design adds extra stability when working on vise held items. 2 pre-drilled & tapped side-oriented holes for accessory mounting. 4 Rubber foot pads prevent marking and scratching of work surface. |
Parts and Accessories
Rapid Assembly Circuit Board Holder shown in use with:
18" Cross Bar (Model 318-18) and Circuit Board Arms (Model 316) sold separately.
Check out all the interchangeable vise heads, bases, bases mounts, and accessories.
Product Description
Product Description
Circuit Board Holder, Base Type Weighted, Jaw Width 5/16 In., Max. Opening 12 In., Throat Depth 6-3/16 In., Jaw Face V-Grooved, Jaw Material Cast Aluminum, Material Composite, Swivel Angle 360 Degrees , Overall Length 12-1/4 In., Overall Width 14 In., Overall Height 20-1/2 In., Features (8) Rotating Adjustment Positions at the Head, Six Positive Lock Positions in the Vertical Plane and Variable Height Adjustment, Notches to Hold Small Parts
From the Manufacturer
The PanaVise 333 rapid assembly circuit board holder is an electronics assembly work-holding tool designed for speed and versatility. The unit consists of three components: a 10" center shaft integrated into a weighted base, a pair of circuit holder arms connected by a square crossbar, and an adjustable connector linking the crossbar to the center shaft.
The circuit board holder arms slide along the 14" crossbar, allowing circuit boards up to 12" to be held. (A minimum of 1" of cross bar length is required to support each circuit board holder arm) Arms are locked into place by two tightening knobs at their bases. V-shaped grooves along the inner edge of the arms ensure that circuit boards are securely held, while notches positioned laterally near their tips can be used to hold small electronic parts. The right circuit board holder arm includes a ratcheting lever that allows for a fine adjustment of the opening between the two ams. This allows for fast mounting and removal of circuit boards without having to loosen the main adjustment knob of the holder arms. The connector between the center rod and the crossbar swivels to eight adjustable positions, as well as six positive lock positions on the vertical plane. Variable height adjustments can also be made along the center rod. The weighted base is five lb. and formed of cast iron with wing structures at the sides which spread its weight, increasing the PanaVise 333's stability. Each of the winged sections contains a pre-drilled and tapped hole suitable for mounting accessories.
Specifications
- Capacity: Holds circuit boards up to 12" (304.8 mm) wide and 5/32" (4 mm) thick
- Rotating adjustment positions: 8
- Vertical lock positions: 6
- Variable height adjustment: Yes
- Compatible with circuit board holder crossbars of varying width: Yes
- Pre-drilled and tapped holes for accessories: 2
- Height (base to top of vertical shaft): 10" (254 mm)
- Total weight : 6.4 lb. (2.9 kg)
- Base weight: 5 lb.
Limited Lifetime Warranty
All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance.
About PanaVise
Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, electronics, CCTV camera mounts, and audio/video mounts, earning PanaVise the nickname the "the hold it anywhere you want it company."
Specifications for this item
----------------------------
Hey my bro, Many thanks for visiting our Website. Are you currently trying to find facts about PANAVISE 333 Rapid Assembly Circuit Board HolderThe Good News, Right now we're giving big as much as 85% for people who buy PANAVISE 333 Rapid Assembly Circuit Board Holder products through this Website.Not just that, you'll even get yourself a absolutely free discount in the event that you order today.Thanks for watching and please give a thumbs up.
----------------------------Disclaimer:
This Website is participant in the amazon services llc associate program.I do use affiliate links when linking products in the Website description.This does not affect your buying experience or item price but does mean I receive a small commission on items purchased using such links.An affiliate advertising program designed to provide a means for sites to earn advertising fees by linking to website and amazon.comWe also participates in affiliate programs with other sites. We are compensated for referring traffic and business to other companies.
---------------------------
0 Response to "Black Friday 🔥 PANAVISE 333 Rapid Assembly Circuit Board Holder"
Post a Comment